COMMAND PLAQUE BOARDS & PLAQUES

AMENDMENT 0001:

ANSWERS TO QUESTIONS RECEIVED.

1. BOARDS SHALL BE MADE OUT OF HDU MATERIAL. WITH THE FRAME AROUND THE BOARD AND THE PHOTO FRAMES TO BE WOOD.
2. THICKNESS FOR THE LABEL PLATES WOULD BE APPROXIMATELY 1/16” (0.062”).
3. THICKNESS FOR THE PHOTO FRAMES SHALL BE AS THICK OR THIN AS REQUIRED TO BE FLUSH WITH THE BOARDS’ FRAMES AND THE RAISED LETTERING (IF POSSIBLE, BUT NO THICKER THAN EXCEEDING THE BOARDS’ FRAMES BY ¼”)
4. CARVED SEALS (BOTH ON THE BOARDS AND INDIVIDUAL SEALS) ARE TO BE MADE OUT OF HDU AND MOUNTED, IF NOT .... Read More